You've found the perfect lot. It's in a charming Ottawa village, close to local shops and restaurants, with just enough space to build the home you've always imagined.
There's just one problem. The zoning might not allow you to build it.
Picture the lot first, and the rules second, and you can end up loving a place you are not allowed to build on. In Ottawa's villages, the zoning code decides what can go on a lot before you fall for the view, the main street, or the price. It is not the exciting part of buying. It is the part that saves you from an expensive surprise.
Here is how village zoning actually works, in plain language, and how to check a lot before you offer on it.
Village, not suburb
Ottawa's villages — Dunrobin, Carp, Richmond, Manotick, and the rest — are designated as Village in the City's Official Plan. That word matters. A village is meant to stay a village: a small main street with shops and services, homes mixed in around it, and countryside close by.
That is why village zoning looks different from suburban zoning. It is not just about how big a house you can build. It is about what the lot is for — a home, a shop, a bit of both — and how much of it any one business can take up.
VM, the mixed-use village zone
The main village zone is called VM, for Village Mixed-Use. Its purpose is to allow a wide variety of commercial, leisure, institutional, and residential uses in Village areas. That is the mix you picture on a village main street: a retail store, a restaurant, an office, a medical clinic, a day care, a bank, a hotel, a school, a library, a museum, a place of worship, a personal service business, an artist studio, and homes alongside them.
A few of the numbers that shape a VM lot:
Each individual business occupancy is limited to a maximum of 2,500 square metres of gross leasable floor area, on a lot in a village shown on the City's rural villages schedule.
The minimum lot area in the VM zone is 1,350 square metres.
Those are the zone-wide rules. The part that catches buyers out is what comes next, because VM is split into subzones, and the subzone can change everything.
The subzones matter more than the letters
VM1, VM2, and VM5 sound like small print. On a village lot, they are the whole story.
VM1 is the smallest-scale subzone. Only a short list of uses is allowed — a bank, a community centre, a day care, a government service centre, a personal service business, a restaurant, a retail store, plus a dwelling unit — and any non-residential use has to be on the ground floor, with each occupancy capped at 200 square metres. Think small shop, not big-box.
VM2 is tighter still. It allows a limited list — an office, a medical facility, a restaurant, a retail store, a personal service business — and each non-residential occupancy is capped at 120 square metres of gross leasable floor area, about 1,292 square feet, smaller than VM1's 200 square metres. If you are picturing a roomy clinic or a large restaurant, VM2 may not allow it. A small professional office might fit within the limit, while a larger commercial operation may not.
VM5 is the one to watch if you are dreaming of a standalone home. Despite the residential uses in the general VM list, only one dwelling unit is permitted in VM5, and it must be ancillary to a permitted use — in plain terms, a home that goes with the business, not a home on its own. A residential care facility, a rooming house, and a shelter are prohibited in VM5.
A great property isn't necessarily the right property for what you want to do with it. Understanding the zoning before purchasing could save buyers considerable time, money and disappointment.
V1-V5: the homes-only village zones
Separate from VM, there are five Village Residential zones, V1 through V5. In each of them, the only permitted use is a dwelling unit. No shops, no offices — homes only. What changes between them is how many homes a lot can hold, and how big the lot has to be.
V1 is for villages not on municipal water and sewer. It allows a maximum of 2 dwelling units per lot, on large lots — a minimum of 8,000 square metres in some subzones and 4,000 in others.
V2 and V3 are for serviced village lots. Both allow up to 3 units on full municipal services and 2 units on other servicing, on much smaller lots — a minimum of 360 to 880 square metres, depending on the subzone. V3 allows more units if the lot area and width are both double the minimums.
V4 and V5 allow attached homes at higher densities, with minimum lot areas counted per unit and maximum heights of 11 metres in most cases, 15 metres in one V5 subzone. Planned unit developments are a conditional use only in Carp, Richmond, or Manotick.
The detail that matters for buyers is simpler than the table: in a V zone, the question is not whether you can build a home, it is how many homes the lot allows, and whether the servicing — municipal water and sewer, or well and septic — supports that number. And just because a zone permits multiple dwelling units doesn't automatically mean a particular lot can accommodate them. Lot dimensions, servicing capacity and other zoning provisions still need to be considered.
What if the lot is smaller than today's zoning requirements?
Many properties in Ottawa's older villages were created long before today's zoning rules existed. As a result, some lots may not meet the current minimum lot area or frontage requirements.
That doesn't automatically mean they can't be developed. Ottawa's zoning by-law includes provisions that may allow certain legally existing undersized lots to be developed, subject to specific conditions. There may also be site-specific zoning exceptions that affect what is permitted. Two properties on the same street could have different development opportunities because of their zoning history, lot dimensions or applicable exceptions.
This is another reason to investigate the individual property rather than making assumptions based on neighbouring homes. Don't assume that because a neighbouring property has a particular building or business, you're automatically allowed to do the same thing.
How to check a lot before you offer
Zoning text online is for information. The confirmation comes from the City. Before you offer on a village lot, do these three things, in this order:
Find the zone on GeoOttawa or the City's zoning map, and note the exact subzone — VM5 is not VM, and V1 is not V3. Make note of the complete zoning code, including any subzone or exception numbers.
Read the permitted uses and the provisions for that subzone, not just the zone name. Pay particular attention to the permitted residential and commercial uses, minimum lot dimensions, building setbacks and height restrictions, maximum dwelling units, and any applicable exceptions.
Confirm it with a City development information officer. Ask them to confirm the zone, the subzone, and what you are hoping to build. That conversation is the check that counts. You can reach a development information officer through 311, or directly at 613-580-2424, extension 23434, or by email at dioinquiry@ottawa.ca. Include the subject address, the proposed use, and any other pertinent information. Be specific about what you're hoping to do — for example, "I'm considering purchasing this vacant lot and would like to build a single detached home. Does the current zoning permit that use?" The more specific your questions, the more useful the information you receive will be.
For more complicated development plans, consider obtaining written advice from a qualified land-use planner. Preliminary zoning guidance should not be treated as a guarantee of development approval.
One more wrinkle, and it is an important one right now: Ottawa is in the middle of a zoning change. By-law 2026-50 was enacted by Council on March 11, 2026, and applications deemed complete on or after that date must comply with both the old By-law 2008-250 and the new By-law 2026-50, with the stricter provisions governing. Parts of the new by-law are under appeal, so the rules are still settling. Don't rely on outdated zoning information or assume that rules from a previous property purchase still apply. That is one more reason to confirm with a development information officer rather than relying on a single page you found online.
If the zoning doesn't fit
If the zoning does not allow what you want to build, you are not necessarily finished — but you are in ask-a-planner territory, not assume-it-will-work territory. The usual routes are a zoning by-law amendment, a minor variance, or a site plan process, depending on what you are asking for. None of them is a promise. A planner can tell you whether your idea has a realistic path, what it would cost in time and fees, and what the neighbours and the City are likely to say. Ask those questions before you buy the lot, not after.
One thing to know: site plan approval does not independently authorize a land use that zoning prohibits. If the use itself isn't permitted, site plan control alone won't fix that.
Servicing still applies
Zoning is only half the check on a village lot. The other half is servicing. A lot that allows three homes still needs water and wastewater to support three homes, whether that is municipal services or a well and septic that can handle it. Well and septic feasibility sits alongside zoning, not instead of it. If you are buying rural, build both checks into your offer conditions — the zoning confirmation and the servicing investigation — and give yourself time to do them properly.
Depending on the property, the servicing investigation may include well water availability and quality, septic system feasibility and capacity, soil conditions, municipal servicing availability, lot grading and drainage, conservation authority restrictions, and access. A vacant lot may look perfectly suitable for a home, but the cost or feasibility of servicing it could tell a different story.
Before you fall for a village lot: the short version
Find the exact zone and subzone on GeoOttawa or the City zoning map.
Read the permitted uses for that subzone, not just the zone name.
Remember VM5: one home only, and only as part of a permitted business use.
In a V zone, check how many units the lot allows and whether the servicing supports that number.
Check whether the lot meets today's minimum dimensions — older village lots sometimes don't, and that changes what you can do.
Confirm it all with a City development information officer through 311 or directly at 613-580-2424, extension 23434.
Ask a planner about rezoning or a variance before you buy, not after.
Check well and septic feasibility alongside zoning.
Protect yourself with offer conditions that allow enough time to investigate zoning, servicing and development feasibility.
That is the lot. Do those checks first, and the village lot you fall for will be one you can actually build on.
Thinking about a move to a village near Ottawa?
Whether you are dreaming of a home in Dunrobin, Carp, Richmond, or Manotick, or you have already found a lot and want to know what it actually allows, we would love to help. As local Realtors who also call rural Ottawa home, we know both the appeal of village living and the practical details that come with it.
Get in touch, and let us check the zoning before you fall for the lot.
Mark and Kristina Hartley
Homes with Harts | RE/MAX Boardwalk Realty
Disclaimer: This article provides general information about zoning in Ottawa and is not intended as legal, planning or development advice. Zoning regulations, permitted uses and development requirements can change and may vary by property. Buyers should confirm current requirements with the City of Ottawa and consult qualified professionals where appropriate.